Porsche 997 GT3 RSR

Porsche 997 GT3 RSR

Racing car, 2008

Highlights

  • The Only RSR painted Signal Yellow From The Porsche Factory!
  • Engine N0. 61822547 (PMNA Engine Number 820)
  • Chassis No. WP0ZZZ99Z8S799936

2008 Porsche 911 GT3 RSR for sale!

The 997 generation GT3 RSR was developed to replace the aging 3.6-liter 996 GT3 RSR. Built to comply with the Automobile Club de l’Ouest, the FIA-GT, and IMSA as well as VLN regulations, its purpose was to compete in the GTE (GT2) class of endurance racing. Upon its debut at the 2007 24 Hours of Le Mans, the GT3 RSR claimed a first-in-class victory and performed with exceptional results in the ALMS series.

View the cars in your watch list: Go to watch list
Please mention Elferspot when calling Road Scholars.
Call

The vehicle in detail

In an effort to extend its competitive advantage over the successful Ferrari F430 GT, Porsche updated the 911 GT3 RSR for the 2008 sports car racing season with a multitude of modifications. Minor changes were made to the exterior of the 2007 model, mainly focusing on optimizing aerodynamics by addressing the nose of the car. The front bumper received canards and side air outlets at the lower front edges and a large intake was introduced at the top of the bumper to generate more downforce and reduce drag. Flat, composite underbody panels further improved aerodynamic efficiency. Revised placement of the radiators to the middle and side of the nose efficiently dissipate heat from the cooling system. Extensive changes to the suspension components and kinematics allowed for a much more broad range of adjustments to be tailored to the track and driver’s preferences, as well as vastly improve mechanical grip.

The welded-in safety cage increased the stiffness of the body by ten percent over the 996 RSR. Distinctive wheel arches widened the body by 50 mm on each side. The supplementary oil tank, power steering components, and battery were relocated to the front to improve the RSR’s weight distribution. To reduce the overall weight of the RSR, carbon fiber was employed throughout the bodywork- including the front and rear lids, bumpers, front fenders, doors, front and rear paneling, and wing. Polycarbonate rear and side windows in place of glass further aid in weight reduction.

Based on the Mezger-designed engine of the 997 GT3, the RSR features a 3.8-liter engine built to be capable of producing 465 horsepower at 8,000 rpm with the capability of revving all the way to 9,400 rpm. According to FIA/ACO regulations, it was fitted with two 30.3 mm air restrictors and the corresponding reprogramming of the electronics. For the first time, the RSR adopted the six-speed sequential manual transmission of the LMP2 specification sports prototype RS Spyder. The implementation of this gearbox significantly reduced weight and further reduced internal friction through a flat-angle axle design. ZF-Sachs shock absorbers with a Through-Rod-System offered considerably lower chamber pressure and hence generate less friction than conventional dampers,  resulting in significantly improved response characteristics. The improved axles also featured new anti-roll bars, an adjustable upper link, and an optimized lower link.

Jochen Rohr special ordered this RSR car from PCNA to compete in the 2008 IMSA series. He had a special relationship with the Porsche factory and was able to convince them to do a “Paint to Sample” of Signal Yellow on his new RSR. He took delivery of chassis #9936 and tested the car extensively at Sears Point (Sonoma Raceway) with Dominik Farnbacker in early 2008. Unfortunately, his sponsorship agreements fell apart for the season and he ended up selling the RSR to the Falken Tire Team to start their first season in endurance racing.

It is the only RSR painted in Signal Yellow from the Porsche factory. Chassis 9936 was used for tire development and only competed in a few races in the 2009 session in its iconic Falken blue/teal livery. Well-known Porsche collector Jim Edwards purchased chassis 9936 directly from Falken to complete his trio of Falken RSR team cars.

2009 Falken Tire Team Car #17 with drivers Bryan Sellers/Dominic Cicero

April 18th, 2009 American Le Mans Series Long Beach, DNF
September 26th, 2009 12th Annual Petit Le Mans, finished 23rd
October 10th, 2009 Monterey Sports Car Championship Laguna Seca, finished 13th
With only 41 cars built in 2008, the 997 RSR is a rare ultimate-specification Porsche GT racer. It is eligible for USA historic race events such as Rennsport, or the Daytona 24hr Classic. This RSR would also be eligible to race in both Masters Endurance Legends (MEL) as well as in Peter Auto’s Endurance Racing Legends (ERL) in Europe.

Chassis 9936 was extensively prepared by Porsche Motorsports North America and Migliore Motorwerks from 2015 to 2018. Porsche PMNA provided an engine rebuild certificate in November 2015 and the car was used lightly for Rennsport VI in 2018.

Highlights:

  • The Only RSR painted Signal Yellow From The Porsche Factory
  • Ordered New By Jochen Rohr From Porsche Cars North America
  • Purchased by Falken Tires for Tire Development
  • Prepared by Porsche Motorsports North America and Migliore Motorworks from 2015-2018
  • Engine Rebuilt in November 2015
  • Lightly used at Rennsport VI in 2018
Continue reading

Specifications

Year of construction: 2008
Model: 997 GT3 RSR
Body: Rennwagen
Series: 997
Power: 465 HP
Cylinder capacity: 3,8 Liter
Steering: left
Transmission: Manual
Drive: Rear drive
Fuel: Gasoline
Interior color: Black
Interior material: Fabric
Exterior color: Yellow/Gold
Manufacturer color code (exterior): Signal Yellow
New / used: Used car
Ready to drive: yes
Country of first delivery: United States
Car location: USUnited States

More information

Series portrait
Elferspot magazine
Importing the car?

Elferspot recommendation

Similar cars

{{cartCount}}

Cart

Continue shopping

Watch list

Edit watch list

Sold

{{item.title}}

Not available

No cars in the watch list

Share

Share "Porsche 997 GT3 RSR" with your friends!

Facebook X (Twitter) Pinterest WhatsApp E-mail