A lightweight 911 Carrera that has been restored and built with great attention to detail.
You can also find a short video about this vehicle on our Instagram channel.
Translated by Google Translate.
Germany
Tuning measures:
Flywheel lightened
Performance increase Motronic
Larger throttle valve
Aluminum sports clutch
Starter Porsche 993
Oil cooler in the front, thermostat new
K+N air filter
Lightweight gel battery
steel roll cage, strut under dashboard and belt tube
Strut bar incl. struts for the front
Steering wheel type Momo 07 incl. modified steering wheel hub
Sports seats PolePosition, rear shell painted in body color
Aluminum pedals black anodized
Aluminum pedal board
Wevo shifting unit including shortened shifting
RS door panels in visible carbon
Door panel covers in fiberglas, covered with imitation leather
OMP 4-point harness
Glovebox insert visible carbon
Bilstein shock absorbers on the front/rear axle “sporty street”
BumpSteer Kit made of titanium adapted for lowering
Unibal strut bearing with camber adjustment
PU bushings on torsion bar/wishbone front axle
PU bushings on torsion bar/rear axle sword rear axle
PU bushes on wishbone rear axle
PU bushes on stabilizer bar front axle
PU bushings on rear stabilizer bar
Turbo tie rods
Fuchs rims in RSR look 7+8×16
964 brake system with 930 main brake cylinder
Flexible steel brake lines on the front and rear axles
Fronthood in carbon/kevlar
RS bonnet stay in Aluminum
Rear spoiler “Ducktail” in Carbon/Kevlar
Roof skin in carbon/kevlar
Front and rear bumper type 3.0 RS in Fiberglas
Plexiglas windows (doors fixed incl. sliding windows)
Rear panel fiberglas
Rear light housing fiberglas
Motor sword lightweight version
Conversion to exterior mirror driver’s side RS 73
Hinges, locks, handles, drilled and newly galvanized or powder coated
Windshield wiper linkage converted to “right-hand”.
Wiper linkage lightened, newly galvanized, smaller wiper engine
Lightweight aluminum hood grille
Tank opening relocated, tank newly powder-coated black
Dansk stainless steel rear silencer
100-cell stainless steel catalyst
Engine tins 911 RSR lightweight construction
Electrically heated windshield
Revision work:
Transmission revision with shortened gear ratio (for gear 3, 4 and 5)
Pedal block completely equipped with new bearing, powder coated,
Rear axle swords, original replacement
Bearing cover rear axle sword
Supporting joints front axle
Wheel bearing front axle
Handbrake cables right/left new
Fuel lines and brackets replaced
Bowden cable front hood + rear spoiler new
| Year of construction: | 1986 |
| Initial registration date: | April 1986 |
| Model: | 911 Carrera 3.2 |
| Body: | Coupé |
| Series: | 911 G-Model |
| Mileage: | 224850 km |
| Power: | 240 HP |
| Cylinder capacity: | 3.2 Liter |
| Steering: | left |
| Transmission: | Manual |
| Drive: | Rear drive |
| Fuel: | Gasoline |
| Interior material: | Fabric/Leather combination |
| Interior color: | White |
| Exterior color: | White |
| Manufacturer color code (exterior): | Grandprixweiss 908 |
| Matching numbers: | yes |
| Vehicle inspection valid until: | October 2023 |
| Condition: | Fully restored |
| New / used: | Used car |
| Ready to drive: | yes |
| Registered: | yes |
| Country of first delivery: | Germany |
| Car location: | Germany |
Get in and get started
New here? Sign up now for free!
You are a car dealer?
Find out more about selling as a car dealer
Get in and get started
Forgot your password? Reset password
New here? Sign up now for free!
